blackberry ip camera app

Hi Everyone,

I just wanted to let you know, there is a new Blackberry Phone app out now that provides you with an excellent way to view your cameras other than from a computer!

Here are the details:

Features: Singlecam

  • Single dvr, ip camera, or video encoder stream support
  • Support for 95 manufacturers and 500+ models.
  • 1 & 4 port video encoder support for analog cameras (selected models). Limited to 1 port.
  • Support for authentication
  • Support for Pan, Tilt, & Zoom (not available on all models)
  • Use of trackball (when available) to move camera
  • Ability to change ip address and port as desired for internal and remote use.
  • Direct stream support. No video going through 3rd party servers
  • No monthly or annual subscription fee
  • Support for landscape and portrait mode (currently only Storm)
  • Function to save jpg snapshot to local media
  • Support for MJPG and JPG codecs as supported. Mjpg is preferred method of video streaming when supported. Jpg used for jpg refresh (when jpg not supported) and snapshot.  MPG4 is in beta for supported cameras.

 

Features: Multicam

  • Single and multiple dvr, ip camera, and video encoder stream support
  • Support for 95 manufacturers and 500+ models.
  • Video encoder support (selected models) for analog cameras
  • Support for authentication
  • Support for Pan, Tilt, & Zoom (not available on all models)
  • Use of trackball (when available) to move camera
  • Ability to change ip address and port as desired for internal and remote use.
  • Direct stream support. No video going through 3rd party servers
  • No monthly or annual subscription fee
  • Support for landscape and portrait mode (currently only Storm)
  • Function to easily change cameras while viewing. ‘Previous Camera’ and ‘Next Camera’ function in menu while viewing to automatically change camera.
  • Function to automatically rotate through cameras based on time period. For instance set the application to rotate to the next camera every 30 seconds automatically
  • Function to save jpg snapshot to local media
  • Support for MJPG and JPG codecs as supported. Mjpg is preferred method of video streaming when supported. Jpg used for jpg refresh (when jpg not supported) and snapshot.  MPG4 is in beta for supported cameras.

GET IT NOW:   TotalControlApps.com

The power went out for a minute and when it came back on I could not see video from my camera. After searching through my settings I discovered the problem. I had recently disabled my SSID broadcast.  To reconnect to the camera I had to update my DDNS connection. That fixed the problem immediately. I tested the scenario again by unplugging the camera myself and achieved the same results. I could not see the camera until I updated the DDNS in the router again. Then I turned the SSID broadcast back on. The camera automatically reconnected with no work on my part. I tested it a few times and everytime it reconnected. Problem solved.

Tagged with:
 

To view your cameras over the internet you will need to set up a DynDNS account. This is an easy process that does not take long. In short, this process gives your cameras their own web address so you can see them. All you need to do is subscribe to a free service such as DynDNS.com and follow the set up steps. *Importatnt tip – The DynDNS.com FREE service works perfect as long as you log in at least once every 30 days. But of course that will not be a problem when you are logging in to watch your EZ Network Cams everyday.*

When you  log in to the DynDNS.com website you will want to follow these simple steps.

  1. Choose a name for your site
  2. Choose Service Type:@host with ip address
  3. Enter the ip address shown on the page
  4. Create a User Name and Password
  5. Check your E-mail and confirm Registration
  6. Your Done!
  7. Keep this information handy for setting up your router and EZ Network Cams.
Tagged with:
 

 

EASY INSTRUCTIONS: (From Set-up to Working Wireless!)

 
Open this PDF file and print the detailed instructions: EASY INSTRUCTIONS
 
 
SEE Related Illustrations Below:
 

Tagged with:
 
 If you are using 2 camera in the network and you want to access the camera remotely via solo link, Here is the thing you need to do:
 
  • Configure the 1st camera with same wireless settings from the router with the follwing: �
    • Same Wireless setting should be setup to the WVC54G
    • IP Address of 192.168.1.116
    • Default Gateway: 192.168.1.1
    • Subnet Mask: 255.255.255.0
    • DNS: Valid DNS from the Status page of your Router
    • Go to Options Tab and select UPNP Enable
    • Enable Alternate port and change the port to (1025-65534) which should be unique from any devices used.
    • Go to the linksys router setup page
    • Enable port forwarding for port 1025 into an ip address of 192.168.1.116
    • Then Go to the Solo Link DDNS Tab of the Camera
    • Input the username and password needed
    • Change the WAN port to 1025
    • DDNS update should be Every 15 min
    • Make sure that the Status of the DDNS should state Registered and Connected
  • By then you should be able to access your camera via Domain Name through the following pattern (cameraname.DNS you registered.ourlinksys.com )

With regards to the second WVC Camera

  • Configure the 1st camera with same wireless settings from the router with the follwing:  
    • Same Wireless setting should be setup to the WVC54G
    • IP Address of 192.168.1.115
    • Default Gateway: 192.168.1.1
    • Subnet Mask: 255.255.255.0
    • DNS: Valid DNS from the Status page of your Router
    • Go to Options Tab and select UPNP Enable
    • Enable Alternate port and change the port to (1024) which should be unique from any devices used.
    • Go to the linksys router setup page
    • Enable port forwarding for port 1025 into an ip address of 192.168.1.115
    • Then Go to the Solo Link DDNS Tab of the Camera
    • Input the username and password needed
    • Change the WAN port to 1024
    • DDNS update should be Every 15 min
    • Make sure that the Status of the DDNS should state Registered and Connected
  • By then you should be able to access your camera via Domain Name through the following pattern (cameraname.DNS you registered.ourlinksys.com )
  • Tagged with:
     

    Do more and do it faster with this Linksys WRT160N 802.11n MIMO Wireless LAN 4-Port Broadband Router!

    Enjoy fast wireless connectivity for your home or home office and share Internet access, files, print and stream stored media with large groups of users, all without wires! With four 10/100 Ethernet ports you can connect printers, network storage drives, and other Ethernet-enabled devices to your network and access and share them wirelessly from all your computers at once. Specially designed internal antennas provide great range in an attractive, sleek case that looks good in any room, on a shelf or wall-mounted.

    Advanced wireless security and SPI FireWall protection is designed to safeguard your home network and computers from most Internet attacks! Order this Linksys WRT160N wireless-N broadband router today!


      Features/Specifications:

    ——————————————————————————–

      •Linksys 802.11n MIMO Wireless LAN 4-Port Router
    •General Features:
    •Internet Sharing Router and 4-Port Switch, with a built-in speed and range enhanced Wireless Access
    •Standards: Draft 802.11n, 802.11g, 802.11b, 802.3, 802.3u
    •RF Power (EIRP) in dBm: 14 dBm
    •UPnP able/certified
    •MIMO Technology
    •All LAN ports support auto-crossover (MDI/MDI-X)
    •Wireless N Technology makes it easy for multiple users to share Internet Access, Files and Printing
    •Internal Antennas
    •EnergyStar compliant
    •Security Features:
    •WEP
    •WPA
    •WPA2
    •Security Key Bits:
    •128-bit
    •256-bit
    •Ports:
    •Power
    •Internet
    •Ethernet
    •Buttons:
    •Reset
    •Wi-Fi Protected Setup
    •LEDs:
    •Ethernet (1-4)
    •Wi-Fi Protected Setup
    •Wireless
    •Internet
    •Power
    •Dimensions:
    •1 x 8 x 6.5-inch (H x W x D, approximate)
    •Regulatory Approvals:
    •FCC
    •CE
    •cULus Listed�
    •C-Tick
    •WEEE

      Package Includes:

    ——————————————————————————–

      •Linksys 802.11n MIMO Wireless LAN 4-Port Router
    •Power Adapter (100-120V)
    •Ethernet cable

    Tagged with:
     

    This dual-band wireless-N router provides smooth, fast HD video streaming and wireless gaming performance. A built-in USB port and UPnP A/V media server let you share files on your network and stream content to UPnP-compatible game consoles and devices.

    What’s Included

  • Cisco Linksys E3000 High-Performance Wireless-N Router
  • Cisco Connect software
  • Owner’s manual
  • Product Features

    • Wireless-N technology
      Eliminates drops and dead zones while delivering high performance.
    • Up to 300 Mbps data transfer rates with Wireless-N
      For fast, efficient operation. Dual-band 2.4GHz and 5.0GHz wireless connectivity supports high bandwidth applications, such as video streaming or file sharing.
    • Compatible with 802.11a, 802.11b and 802.11g standards
      For an easy connection.
    • Built-in 4-port 10/100/1000 Mbps Gigabit Ethernet switch
      For wired connection of up to 4 computers. All ports support Gigabit speed and auto-crossover (MDI/MDI-X).
    • LEDs
      Include power, USB, Internet, wireless, Wi-Fi Protected Setup and Ethernet (1-4).
    • Parental controls
      Block specific websites and restrict Internet access during certain hours.
    • Set up a separate, password-protected guest network
      To let visitors have access to the Internet without having access to your computers or data.
    • Built-in USB port
      For sharing files at home or on the Internet.
    • Built-in UPnP A/V media server
      Allows you to stream video and media content to an Xbox 360, PlayStation 3 or other UPnP-compatible device.
    • WEP, WPA/WPA2 (personal and enterprise) and SPI firewall protection
      With up to 128-bit encryption to keep your information secure.
    • Cisco Connect software
      Allows you to setup your wireless network in no time. Advanced Settings allow you to customize your network.

    Tagged with:
     

    There are many reasons why people install network cameras.

    First, the viewing console is built right into every individual camera, whether it be wired or wireless. The benefit of this is you can log into any ip network camera from an internet conenction from anywhere in the world and be able to instantly view the cameras video. You can even snap a shot or record it on your end!

    Wireless ip network cameras provide a great way to monitor your home or warehouse or small business because they are easier to set-up and install. You don’t have to drill into your walls or ceiling to run the network cables because it operates through a wireless router network with-in the home or building.

    These type of ip cameras are great for keeping an eye out on your children, pets, home entry way, business lobby, warehouse or anywhere you would like to monitor!

    Tagged with: